Returns

All Super-elastic Signal Stick antennas are sold with a lifetime warranty. In short, if it breaks then we will fix it.

If yours is not working, please email us at sales@signalstuff.com with a photograph showing what happened.  If there is a good story then please include that too for our entertainment =] Sometimes we can help you fix it via email.

NOTE: Unfortunately, we cannot provide return shipping labels for antennas outside of the US. This isn’t because we don’t want to, it’s because we literally can’t find a way to do so. Sorry for the inconvenience this may cause! If you return it to us we’ll still honor the warranty.

12 thoughts on “Returns

  1. I would like to order an antenna. I have a Yaesu VX-5 tri-band handheld but I am not sure what type of antenna I would need. Could you please help me and let me know what my choice(s) are? I live in West Valley City, Utah. Thank you. KB7AVB

    1. See https://signalstuff.com/2016/08/choosing-the-correct-antenna-connector-for-your-radio/

      The Yaesu VX-5r radio needs an antenna with a SMA-M connector on it.

  2. I ordered and received a male connector but when I received it I realized I should have ordered a female connector. How do I return this male and get a female connector?

    1. Email sales@signalstuff.com and we’ll get you figured out. No worries!

  3. I’m wondering if you have any reports of use or testing of this antenna on the 1.25M Band. I have a Tri-Band radio and am interested in using it if it will cover the 3 Bands well. Any info you can provide will be appreciated.

    1. I have personally tested the dual band version on 1.25 meters and I have made contacts on local repeaters with it; that said, both mathematically and looking at measured SWR (which, btw, requires more than just an antenna analyzer — that’ll usually be inaccurate due to the analyzer changing the antenna system) performance on 1.25 meters with the dual band 2m/70cm version should be pretty much awful.

      In other words, the only reason it won’t damage your radio is because your radio (all radios these days) is smart enough to decrease power if needed so that reflected power doesn’t harm it.

      We do have monoband 220 antennas which you can use, but we don’t have the manufacturing capability to produce a tri-band antenna which is up to our standards.

  4. I am looking to buy the antenna for my Yaesu FT-70DR. I will be getting the SMA-male version. My question is do I need the rubber spacer? Put another way, what is that spacer’s function?

    Please advise.

    1. I don’t *think* you will on the FT-70; the function of the spacer is just to fill the gap and make it look better. It may also offer a *very* slight improvement to water resistance on some radios (but the signal sticks themselves aren’t specifically water resistant, so only slight) and a slight improvement to mechanical strength as well, but primarily it’s just aesthetic. The length of the SMA post differs from radio to radio (even with the same brand, sometimes even with the same model) so with some the antenna will tighten down right against the body of the radio and some will have a small gap; the spacer is just a 1/4″ ID, 1/2″ OD, 1/16″ thick rubber washer which fits nicely around the SMA post between the radio and the antenna.

  5. I was good to see you this morning, I appreciate your support of the events in Salt Lake and hereabouts. Thanks too for what you do with HamStudy.

    I picked up a couple of new antennas this morning and a washer for IC T70a. The washer fills the gap very nicely. Looks a lot better with it in place.

    A quick question about the BNC mount for my IC V80. The old one locked on and off with an easy twist. The new one is very tight. I couldn’t lock in down with my bare hands. I had to grab a rubber pad my wife uses for opening bottles. Is this a problem? Will it hurt my HT to put that much pressure on it?

    Vern, K7VMR

    1. Hey Vern,

      Some of our newer batch of connectors do that; if you have a metal file you can file the point that catches the nub just a bit and it’ll fix it right up. Shoot me an email at sales@signalstuff.com if you have any trouble!

      Richard

  6. Hi, I have a Baofang BF-F8HP, I am not sure what type of antenna I would need. Could you please help me and let me know what my choice(s) are?

    Thx…

    1. You can find that information on the antenna page listed when you choose a connector type under the models which that connector type fits… but what you need is an SMA-F.

Leave a Reply to jeff.bujun Cancel reply

Your email address will not be published. Required fields are marked *