This antenna connects directly to your radio.

Relocates any BNC antenna outside your vehicle in seconds. Connects to any BNC-equipped radio, BNC adapter, or Signal Strand™ adapter.

Adds a Signal Strand™ connection point to any BNC-equipped radio. Installs inline on between the existing BNC connector and antenna to provide a connection point for attaching a Signal Strand™ counterpoise wire (sold separately) to improve both transmit and receive performance.

A ready-to-use, flexible 18 AWG silicone-insulated wire that attaches to any Signal Strand™ adapter to improve antenna balance and enhance both transmit and receive performance.

This antenna works with the Signal Strand™ System.

Relocates any BNC antenna outside your vehicle in seconds. Connects to any BNC-equipped radio, BNC adapter, or Signal Strand™ adapter.

For a radio that normally takes BNC, this will let you connect an antenna with an SMA-M connector. Can also be used to connect your Icom or Yaesu antenna to a BNC Mag-Mount.

This is the connector that screws onto the threads that jut out of your radio — note the gender is determined by the center conductor, not the threads! Fits most Icom, Yaesu, Kenwood radios.

For a radio that normally takes BNC, this will let you connect an antenna with an SMA-F connector. Can also be used to connect your Baofeng antenna to a BNC Mag-Mount.

This is the SMA connector that screws into the radio. The plastic cover screws down snug on most handhelds. Fits most Baofeng radios.

This black solid metal adapter fits your PL-259 coax to connect to a BNC adapter or a radio which takes a BNC antenna.