Need something super portable but also solid and reliable? Mount this on a camera tripod for a 60" tall Open-Stub J-Pole and then collapse it back down to fit in your bag! Connects to a coax with a PL-259 connector.

For the fastest, easiest “Grab and go” deployment option pair this with a BNC signal stick and a SMA-F to BNC-F or SMA-M to BNC-F adapter.

The ease of changing antennas on a BNC adapter is attractive to many, so we’ve stocked up on the best quality SMA-F to BNC adapters that we could find. Fits most Baofengs and many other Chinese brands.

This adapter is an enhanced version of our SMA-F to BNC-F adapter, designed for radios requiring an SMA-F connector. It features a connection point for the Signal Strand™ wire (sold separately), which enhances the antenna system and greatly improves performance for both transmit and receive!

The Signal Staff™ Open-Stub J-Pole is designed to mount on a camera tripod, but many prefer to mount it on a mast instead. This handy bracket bolts onto the bottom of the Signal Staff™ using the hardware you already have and can then be used with a U bolt (not included) to mount the Signal Staff to a mast.

Allows you to use a BNC antenna with a radio which normally requires an SMA-M antenna. This slim design works even with radios with a GPS antenna that many adapters won’t fit and has a rubber piece to help keep dust out. Fits most Yaesu, Icom, and Kenwood radios.

This adapter improves on our SMA-M to BNC-F adapter, allowing you to use a BNC antenna with a radio that normally requires an SMA-M connector. It adds a connection point for the Signal Strand™ wire (sold separately), which enhances the antenna system and greatly improves performance for both transmit and receive!

Adds a Signal Strand™ connection point to any BNC-equipped radio. Installs inline on between the existing BNC connector and antenna to provide a connection point for attaching a Signal Strand™ counterpoise wire (sold separately) to improve both transmit and receive performance.

SignalStuff Exclusive! This solid adapter allows you to connect an SMA-M antenna to a radio which normally takes an SMA-F, including most Baofengs and many others. Fits snug and looks like it’s part of the radio!

SignalStuff Exclusive! This solid adapter allows you to connect an SMA-F antenna to a radio which normally takes an SMA-M, such as most Icom, Yaesu, or Kenwood radios.

19" long, designed to be used on your vehicle with an NMO mount that you provide. Made with Super-Elastic Nitinol

For a radio that normally takes BNC, this will let you connect an antenna with an SMA-M connector. Can also be used to connect your Icom or Yaesu antenna to a BNC Mag-Mount.

For a radio that normally takes BNC, this will let you connect an antenna with an SMA-F connector. Can also be used to connect your Baofeng antenna to a BNC Mag-Mount.

About 40" long, designed to be used on your vehicle with an NMO mount that you provide. Made with Super-Elastic Nitinol, this is less durable and handles less power (only 50 watts) than the quarter-wave but has 3dBd gain on VHF and 5.5dBd gain on UHF.

A ready-to-use, flexible 18 AWG silicone-insulated wire that attaches to any Signal Strand™ adapter to improve antenna balance and enhance both transmit and receive performance.

For radios with an abnormally long SMA base, this is just a rubber washer that fits snugly around the connector and fills the gap between the radio and the antenna.

Do you love the rubber cover we put on our BNC connectors? We do too! It fits most BNC connectors, so grab an extra here.

This NMO connector is designed to mount in any 3/4" hole in sheet metal and includes a high quality LMR-200 coax with a BNC connector. Ideal to connect to the BNC adapter on your handheld radio or use with a BNC-F to PL-259 adapter.

This high quality lip mount with NMO mount comes with a thin diameter short section of coax to get through a small opening into your vehicle and then transitions to high quality LMR-200 with a BNC connector. The multi-axis mounting bracket allows for a high degree of flexibility to install on any vehicle with an appropriately sized lip. Ideal to connect to the BNC adapter on your handheld radio or use with a BNC-F to PL-259 adapter.

Anderson compatible PowerPole connector panel for organizing and securing power distribution, sized for standard 1 1/8" openings. Available in single, double, and stacked configurations.

Are you ready to embark on your amateur radio journey? You’ve come to the right place! The HamStudy Technician License HamBook is your friendly guide to obtaining your Technician class amateur radio license.

Bundle discount! Buy the PDF or eBook, get the other for only $2.99!

Your donation helps us keep the lights on and the antennas, software, and books coming. Thank you for supporting SignalStuff!

This black solid metal adapter can go on your OSJ or mobile radio to work with a standard BNC coax – or to put a BNC antenna directly on the radio. (not always recommended!)

This black solid metal adapter fits your PL-259 coax to connect to a BNC adapter or a radio which takes a BNC antenna.

For those who want a quick-change connector, also fits many older radios. You can use this with a SMA-F to BNC-F or SMA-M to BNC-F adapter to use with any radio! Also works great on the BNC Mag-Mount.

This is the SMA connector that screws into the radio. The plastic cover screws down snug on most handhelds. Fits most Baofeng radios.

This is the connector that screws onto the threads that jut out of your radio — note the gender is determined by the center conductor, not the threads! Fits most Icom, Yaesu, Kenwood radios.

Did the rubber cover on your BNC Mag-Mount get lost or damaged? This is a spare. Now twice as thick, starting Dec 2023!

Custom-designed for the FT-60R’s unusually shaped antenna base. This purely cosmetic spacer covers the small gap for a cleaner, finished appearance. May also fit some other Yaesu models.